Product Details

Dark Grey color/ moisture 7-9% suitable for most of the world/ saw cut shrunken face veneer/full birch plywood available/ batch to batch color stable consistency

Specification

Packing

Why Choose Hermitage Oak?

Characteristic: 

● VILFOOR’s Hermitage oak,also called Shrinken face engineered wood flooring. Timeless history reflected in the markings of the wood; our Oak trees cannot speak, but they tell of their lives by displaying characteristics- and it is our responsibility to allow the story be told.

● Shining raised wood knots that can only come from years of growing and accentuation by truly gifted craftsmen.

● Natural cracks- Hermitage Oak flooring retains the natural variation of the timber- our wood craftsmen handwork the wood to ensure all-natural traits are retained and enhanced. Our fillers complement the beauty of the wood.

● Vintage Colour- Hermitage Oak colors run deep, through the veins and develop more richness as time passes. Hermitage Oak is NOT stained. We enhance the natural potential using our reactive treatment, which immerses through the oak and responds to the amount of tannin uniquely in every single board, even within the same board, literally bringing out the natural, beautiful potential of the flooring.

Maintenance

For the first Week

● Do not wash the floor with water or replace carpeting or rugs for 7days from the date your finishing job was completed.

● When replacing furniture, use proper floor protectors such Wood Floor Guard felt pads on all legs.

● Place door mats at all outside entrances to trap dirt and grit.

To care and keep your floor and keep it looking great

● Vacuum or sweep flour regularly

● Remove spills promptly. Use a soft cloth and Bona Swedish Formula Hardwood Floor Cleaner to clean wet spills

● Use a vacuum or a broom for dry spills and abrasives

● Place mats at exterior doors to trap sand and grit from incoming traffic

● Use area rugs on high traffic pathways and pivot areas at ends of steps, near doorways, etc. All rugs should allow floors to breathe. Avoid rubber back or non-ventilated rugs. When rugs are impractical, periodically check for wear.

● Renew a word surface with a Bona Brand Finish before the wood is exposed.

● Maintain the relative humidity between 40% and 55% because excessive humidity can cause wood fibers to swell, creating cracks in the finish

● Never wet map a wooden floor. Excessive amounts of water can cause your wood floor to swell and cup.

● Do not use wax, oil soap, or other industrial or household cleaners on your polyurethane finished wood floor. The use of these products can adversely affect the appearance of the finish and make refinish difficult.

http://www.woodflooring2006.com/